Piesia N-BOX-J1 Manual page 14

深圳市派勤电子技术有限公司
2. Shut down the computer, disconnect the power source, use a jumper cap to short BAT1 pins 1 and 2 for 5
to 6 seconds, and then restore the factory settings.
3. Power on and press the "Delete" key in the keyboard to enter the BIOS interface, enter the BIOS interface
and press the "F9" key-"Enter" to restore
Factory setting, press "F10" key-"Enter" to save and exit settings。
凝聚物联智慧 引领智能地球
第 14 页 共 42 页
www.piesia.com
此内容仅供参考，最终解释权归本公司所有