Table of Contents
Advertisement
深圳市派勤电子技术有限公司
2.3.1 Installation steps
1. Refer to the user manual to adjust all Jumpers on the motherboard correctly.
2. Install other expansion cards.
3. Connect all signal wires, cables, panel control lines, and power supplies.
4. Start the computer and complete the BIOS setup.
Note: The key components of this motherboard are integrated circuits, and these components are easily
damaged by static electricity.
Therefore, please make the following preparations before the official installation of the motherboard;
1. When holding the motherboard, hold the edge of the board so as not to touch the components and the
pins of the plug socket.
2. When touching integrated circuit components (such as CPU, RAM, etc.), it is best to wear an anti-static
bracelet / glove.
3. Before the integrated circuit components are installed, the components need to be placed in an antistatic
pad or an antistatic bag.
4. After confirming that the power switch is in the off position, plug it in again.
2.3.2 Memory installation
Please pay attention to the following two points when installing a memory module;
1. When installing, align the notch of the memory module with the notch of the slot and insert it firmly.
2. When selecting a memory module, you must select a memory module that supports the specifications of
this motherboard.
2.3.3 Jumper Function Setting
Before installing the hardware device, please set the corresponding jumper according to your needs.
Tip: How to identify the jumper and pin 1 of the interface. Please observe the text mark next to the plug
socket.
Thick line or triangle symbol indicates; look at the pad on the back, the square pad is the first pin; there is a
pin 1 next to all jumpers
1 triangle symbol.
2.3.4 CMOS Clear / Hold
CMOS is powered by a button battery on the board. Clearing the CMOS will cause the previous system
settings to be permanently erased and set to the original (factory-set) system settings. The method is as
follows;
1. Shut down the computer, disconnect the power, and short the RTC1 pin.
凝聚物联智慧 引领智能地球
第 13 页 共 42 页
www.piesia.com
此内容仅供参考，最终解释权归本公司所有
Advertisement
Table of Contents
