Advertisement
Table of Contents
Single Raised Garden Bed
3' L x 3' W x 14" H
Installation Guide
BEFORE YOU START
Please Read the instructions carefully to familiarize yourself with every detail
and step involved. Keep this manual for future reference. Find a suitable
space to assemble the Everbloom Garden Bed.
You need at least 41" x 38.2" (104 x 97cm) for the finished product. A flat and
firm area (like a garage floor or flat yard space) is perfect! The only tool you
may need is a rubber mallet.
IMPORTANT NOTES
Small parts are included; we advise you to keep them away from children
and pets.
We also suggest having another person help you assemble.
Load capacity: approximately 11 cu. ft. of soil
RBS233
Advertisement
Table of Contents
Related Manuals for Everbloom RBS233
Summary of Contents for Everbloom RBS233
- Page 1 Please Read the instructions carefully to familiarize yourself with every detail and step involved. Keep this manual for future reference. Find a suitable space to assemble the Everbloom Garden Bed. You need at least 41” x 38.2” (104 x 97cm) for the finished product. A flat and firm area (like a garage floor or flat yard space) is perfect! The only tool you may need is a rubber mallet.
- Page 2 PARTS LIST 2H / 3’ x 3’ Single Raised Garden Bed Left Corner Right Corner Long Board Post Cap Garden Bed Post Post Liner Bottom Bottom 960mm...
- Page 3 ASSEMBLY 2H / 3’ x 3’ Single Raised Garden Bed Start by making sure each corner post is oriented correctly. Reference image 1. Slide one long board into the corner posts from above. Note: The long boards need to be placed in the inward “U” shape of the brackets. (Image 2). Right Corner Post Left Corner...
- Page 4 ASSEMBLY 2H / 3’ x 3’ Single Raised Garden Bed Slide other three long boards into the corner posts from above, as shown in Image 3. Long Board Right Corner Post Long Board Left Corner Post Long Board Left Corner Post Right Corner Post...
- Page 5 ASSEMBLY 2H / 3’ x 3’ Single Raised Garden Bed Slide the rest four long boards to form the second layer, as shown in Image 4. Long Board Long Board Right Corner Long Post Board Long Board Left Corner Post Left Corner Post...
- Page 6 ASSEMBLY 2H / 3’ x 3’ Single Raised Garden Bed If necessary, use your rubber mallet to ensure the boards are tightly in place. Cover the brackets with the 8 end caps, as shown in Image 5. Post Cap Rubber Mallet Post Cap Post Cap...
- Page 7 ASSEMBLY 2H / 3’ x 3’ Single Raised Garden Bed Unfold the liner and cover the bottom of the garden bed, as shown in Image 6 and Image 7. Note: The liner is water-proof. You can use a needle to puncture the liner if you want water to fall through the bottom boards.
- Page 8 Questions or Comments? Email us at service@everbloom-garden.com Welcome to our website: www.everbloom-garden.com Distributed by: Dynaforge Trading LLC St. Paul, MN55101 Email: service@everbloom-garden.com...
Need help?
Do you have a question about the RBS233 and is the answer not in the manual?
Questions and answers