Smart Centre - Bush DLED32FHDS Instruction Manual

Advanced features
Getting the most from your TV
• The application can be terminated.
• The application can be terminated and another autostart
red button application can be launched.
HbbTV allows the applications to be retrieved both from
broadband or broadcast. The broadcaster may enable
both ways or one of them. If the platform does not have
an operational broadband connection, the platform can
still launch applications transmitted on broadcast.
The autostart red button applications generally provide
links to other applications. The user then can switch
to other applications by using the links provided.
The applications should provide a way to terminate
themselves, usually Exit button is used for this.
HbbTV applications use keys on the remote control to
interact with the user. When an HbbTV application is
launched, the control of some keys are owned by the
application. For example, numeric channel selection may
not work on a teletext application where the numbers
indicate teletext pages.
HbbTV requires AV streaming capability for the platform.
There are numerous applications providing VOD (video
on demand) and catch-up TV services. The user can use
play, pause, stop, forward, and rewind keys on the remote
control to interact with the AV content.
Note: You can enable or disable this feature from the
Privacy Settings menu in Settings>System>Privacy
menu.

Smart Centre

Smart Centre is a mobile application running on iOS and
Android platforms. With your tablet or phone, you can
easily stream your favourite live shows and programmes
from your smart TV. Also; you can launch your portal
applications, use your tablet as a remote control for your
TV and share media files.
Note: Being able to use all functions of this application
depends on the features of your TV.
Getting Started
To be able to use internet based features, your modem/
router must be connected to the internet.
IMPORTANT: Make sure the TV and mobile device are
connected to the same network.
For media sharing feature Audio Video Sharing option
should be enabled (if available). Press the Menu button
on the remote, select Settings>System>More menu and
press OK. Highlight Audio Video Sharing and change
as Enabled. Your TV is ready to connect to your mobile
device now.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
Install the Smart Centre application onto your mobile
device.
Start the smart centre application. If all connections are
configured properly, you will see your TV's name on your
mobile device. If your TV's name doesn't appear on the
list, wait a while and tap on the Refresh widget. Select
your TV from the list.
Mobile Device screen
On the main screen you can find tabs to access various
features.
The application retrieves the actual channel list from the
TV first when it starts.
MY CHANNELS: The programmes of the first four
channels from the channel list retrieved from the TV are
shown. You can change the listed channels. Press on
the channel thumbnail and hold. A list of channels will
be displayed and you can choose your desired channel
to be replaced.
TV: You can watch content through the TV tab. In this
mode you can navigate through the channel list retrieved
from your TV and click on thumbnails to view the detail
pages.
RECORDINGS: You can view your active recordings (if
available) and reminders through this tab. To delete any
item, simply press on the delete icon found on each row.
EPG (Electronic programme guide): You can view the
broadcast schedules of selected channel lists through this
tab. You can also navigate through channels by pressing
on the selected channel on the EPG grid. Please note
that updating / refreshing the EPG information may take a
while depending on your network and web service quality.
Note: Internet connection is required for WEB based EPG
information.
SETTINGS: Configure the application to your liking. You
can change;
Auto-lock (Only in IOS): The screen of the device
automatically turns off after a certain amount of time.
Default is off, which means the screen will always stay
on.
Auto-enable FollowMeTV: FollowMeTV function (if
available) will start automatically when this setting is
enabled. Default is disabled.
Auto-connection to TV: When enabled, your mobile
device will automatically connect to last connected TV
and skips the TV search screen.
Change TV (Only in IOS): Shows the currently
connected TV. You can press on this setting to go to
the "TV search" screen and change to a different TV.
Advanced features 39