Cec; System Audio Control; E-Manual; To Program Your Sky Remote For Your Tv - Bush DLED32FHDS Instruction Manual

Advanced features
Getting the most from your TV
all mobile devices. UHD (4K, Ultra HD) channels are not
supported and both of the devices must be connected
to the same network.

CEC

This function allows to control the CEC-enabled devices,
that are connected through HDMI ports by using the
remote control of the TV.
The CEC option in the Settings>System>Device Settings
menu should be set as Enabled at first. Press the Source
button and select the HDMI input of the connected CEC
device from the Sources List menu. When new CEC
source device is connected, it will be listed in source
menu with its own name instead of the connected HDMI
ports name (such as DVD Player, Recorder 1, etc.).
The TV remote is automatically able to perform the main
functions after the connected HDMI source has been
selected. To terminate this operation and control the TV
via the remote again, press and hold the "0-Zero" button
on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the Settings>System>Device
Settings menu accordingly.
The TV supports ARC (Audio Return Channel). This feature
is an audio link meant to replace other cables between the
TV and an audio system (A/V receiver or speaker system).
When ARC is active, the TV will mute its other audio
outputs, except the headphone jack, automatically and
volume control buttons are directed to connected audio
device. To activate ARC set the Sound Output option in
the Settings>Sound menu as HDMI ARC. There will be
no sound output except through the selected option.
Note: ARC is supported only via the HDMI2 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with the
TV. The volume can be controlled using the remote
control of the TV. To activate this feature set the Sound
Output option in the Settings>Sound menu as HDMI
ARC. When HDMI ARC option is selected, CEC option
will be set as Enabled automatically, if it is not already
set. The TV speakers will be muted and the sound of the
watched source will be provided from the connected
sound system.
Note: The audio device should support System Audio
Control feature.

E-Manual

You can find instructions for your TV's features in the
E-Manual.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To access the E-Manual, enter Settings menu, select
Manuals and press OK. For quick access press Menu
button and then Info button.
By using the directional buttons select a desired category.
Every category includes different topics. Select a topic
and press OK to read instructions.
To close the E-Manual screen press the Exit or Menu
button.
Note: Depending on model, your TV may not support
this function. The content of the E-Manual may vary
according to the model.
To Program Your SKY Remote For Your
TV
1. Make sure your SKY box is connected to your TV
2. Turn your TV and SKY box on
3. Press TV on your SKY remote control handset
4. Hold down SELECT and the RED button together
for about two seconds, until the red light on the SKY
remote blinks twice.
5. Key in 0808 on your SKY remote. The light on the SKY
remote should blink twice
6. Default Vestel code as per the Sky Web Site https://
www.sky-remote-codes.co.uk/vestel-sky-remote-
codes/
7. Press the STANDBY button on your SKY remote
control. Your TV should now switch off.
8. Press SELECT again. The light on your SKY remote
control should now blink twice
You should now be able to control some basic functions
on your TV from your SKY remote control (e.g. volume
up/down, programme up/down).
*If this number does not work, please go to SKY website
to find the alternative number to operate the TV.

Configuring Parental Settings

The Parental menu options can be used to prohibit users
from viewing of certain programmes, channels and using
of menus. These settings are located in the Settings>
System>Parental menu.
To display parental lock menu options, a PIN should be
entered. After coding the correct PIN, Parental menu
will be displayed.
Menu Lock: This setting enables or disables access to all
menus or installation menus of the TV.
Advanced features 23