Page 1
G24LT30 OPERATOR MANUAL / BEDIENUNGSHANDBUCH / MANUAL DEL OPERARIO / MANUALE DELL’OPERATORE / MANUEL OPÉRATEUR / MANUAL DE UTILIZAÇÃO / GEBRUIKSAANWIJZING / KÄYTTÖOPAS / ANVÄNDARHANDBOK / BRUKERVEILEDNING / BRUGSVEJLEDNING / INSTRUKC JA UŻYTKOWNIKA / NÁVOD K OBSLUZE / NÁVOD NA OBSLUHU / Uporabniški priročnik / PRIRUČNIK ZA RUKOVANJE / HASZNÁLATI...
Page 2
Address: First Floor, 3a Groveley Road, Christchurch, Dorset, BH23 3HB, UK Here with we declare that the product Category: Electric String Trimmer Model: G24LT30 ( STG311 ) Serial number: See product rating label Year of Construction: See product rating label •...
Page 5
English Description......4 Line cut-off blade......6 4.10 Change to the edging mode... 6 Purpose...........4 Maintenance......6 Overview......... 4 General power tool General information......6 Clean the machine......6 safety warnings......4 Replace the spool......6 Installation......4 Replace the cutting line....7 Unpack the machine.......
English DESCRIPTION The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery- PURPOSE operated (cordless) power tool. This machine is used to cut grass, light weeds, and INSTALLATION other similar vegetation at or around ground level. The cutting plane must be approximately parallel to the UNPACK THE MACHINE ground surface.
English Tighten the screw. ADJUST THE LENGTH OF THE SHAFT Figure 11. ATTACH THE AUXILIARY HANDLE Figure 6 - 8. NOTE Remove the knob from the handle. You can adjust the length of the shaft to operate the Attach the auxiliary handle on the shaft. machine easily.
English MAINTENANCE NOTE IMPORTANT The machine has an auto-feed head. If the cutting line does not automatically advance, it can be Read and understand the safety regulations and the tangled or empty. maintenance instructions before you clean, repair or do the maintenance work on the machine. Start the machine and keep 3s.
English STORE THE MACHINE NOTE • Remove the battery pack from the machine and Make sure that the cutting line is in the guide slot charge it. on the new spool, and is extended approximately 13 • Make sure that children cannot come near the cm.
English TROUBLESHOOTING Problem Possible Cause Solution The machine does not No electrical contact between the 1. Remove battery pack. start when the trigger is machine and the battery pack. 2. Check contact and install the battery pack pushed. again. The battery pack is depleted. Charge the battery pack.
Greenworks website www.greenworkstools.eu) Year of Construction: See product rating label The Greenworks warranty is 3 years on the product, and 2 years on batteries (consumer/private usage) from the date of purchase. This warranty covers • is in conformity with the relevant provisions of the manufacturing faults.
Page 12
English • is in conformity with the provisions of the following other EC-Directives: • 2014/30/EU • 2000/14/EC & 2005/88/EC • 2011/65/EU & (EU)2015/863 Furthermore, we declare that the following (parts/ clauses of) harmonised standards have been used: • EN 60335-1; EN 50636-2-91; EN 62233; EN 55014-1;...
Need help?
Do you have a question about the G24LT30 and is the answer not in the manual?
Questions and answers