Table of Contents
Advertisement
RS-3000 Specifications Manual
10.3 Bluetooth
• This product supports Bluetooth wireless communication with other Bluetooth
devices that have the same profile.
• This product complies with Bluetooth standards; however, its communication
performance with untested devices is not guaranteed.
• Bluetooth devices use the 2.4 GHz frequency band that is shared among other
devices. It may affect the communication speed and distance between this product
and the host device.
• The communication speed and distance may vary depending on the interference and
radio wave condition between this product and the host device.
10.4 Frequency Band.
• This product uses the 2.4 GHz frequency band. Make sure you understand the
following information before using this product.
Note: Scientific, medical, industrial devices, and microwaves use the 2.4 GHz frequency band. Electronic
devices with some form of wireless communication, as well as amateur radio stations may also use the 2.4 GHz
frequency band and may interfere with this product. For best performance, follow these guidelines:
1.
Before using this product, make sure that other devices are not using the 2.4 GHz frequency band.
2.
If radio interference occurs, change the location of this device, or stop the other devices that are
using the 2.4 GHz frequency band.
3.
If you have any questions or issues, please contact our sales office.
10.5 Operating Environment
• Do not use this product at temperatures outside the specified range.
• Do not use this product near combustible materials (including gas, powder, etc.). It
may cause smoke and fire.
• Do not immerse this product in water or any other liquid.
• If condensation forms on the product, do not use the product. The product may
malfunction. Wait until the moisture has evaporated.
• Do not store this product in either dusty environments or in extremely high
humidity.
• Do not store this product in either extremely cold or hot places. Also avoid exposure
to direct sunlight for long periods of time.
• Avoid static electricity and do not put the product near a radio or a TV. Excessive
static electricity may cause malfunctions.
• Do not place in an unstable place.
10.6 General Cautions
• Do not disassemble this product.
• Do not stare into the LED light from the scan window. The LED may damage your
eyes.
• Do not expose this product to oil and chemicals.
• This product may be affected by momentary voltage fluctuations caused by
lightning.
• Do not let children use this product.
16
Advertisement
Table of Contents
