4. Installation in the iCon H250/H400/H500 and in the iD H250/H500
4.3
Replacing the DVI / D15 input
Necessary tools
•
Screwdriver Torx T10
•
nut spanner 5 mm
How to replace the DVI / D15 input?
1. Remove the input module — See the concerning chapter.
2. Remove the side screw
Image 4-9
Side screw fixing the DVI / D15 input
3. Remove the front nuts
Image 4-10
Front nuts fixing the DVI /D15 input
4. Remove the backplane by pulling it off
16
R59770246 DVI HDCP INPUT KIT 28/04/2008