Dispensing Spout Adjust- Ment; Coffee Brewing - Gaggia Unica Operating Instructions Manual

Dispensing Spout Adjust-
ment
Most cups on the market can be used with
this cof ee machine.
The height of the dispensing spout may
be adjusted to better i t the dimensions
of the cups that you wish to use.
Manually move the dispensing spout up
or down to adjust its height by placing
your i ngers as shown in the i gure.
The recommended positions are:
For the use of small cups;
For the use of large cups.
• Two cups/mugs can be placed under
the dispensing spout for brewing two
cof ees at the same time.
• 32 • • 32 •

COFFEE BREWING

Note: Should the machine not
brew cof ee, make sure that
the water tank contains water.
Before brewing cof ee check
the lights on the display and
make sure the water tank and cof ee
bean hopper are full.
Steady on
Leave the knob on the " "
position during the brewing
phase.
Before brewing cof ee, adjust
the height of the dispensing
spout according to your needs.
Using Coff ee Beans
• To brew cof ee, press and release:
the " " button for an espresso cof-
fee;
the " " button for a long cof ee.
• The brewing cycle then starts:
To brew 1 cup of cof ee, press the "
or " " button once. This icon will be
displayed.
To brew 2 cups of cof ee, press the "
or " "button twice. The display will
show this icon.
Steady on
To brew 2 coffees, the ma-
chine automatically grinds
and doses the correct amount of
cof ee. Brewing two cof ees requires
two grinding cycles and two brewing
Steady on
cycles, which the machine carries out
automatically.
• After the pre-dispensing cycle, cof ee
begins to come out of the dispensing
spout.
"
"