Table of Contents
Advertisement
298
Service and Maintenance
Inspect power steering for proper
.
attachment, connections, binding, leaks,
cracks, chafing, etc.
Visually inspect halfshafts and drive
.
shafts for excessive wear, lubricant leaks,
and/or damage including: tube dents or
cracks, constant velocity joint or universal
joint looseness, cracked or missing boots,
loose or missing boot clamps, center
bearing excessive looseness, loose or
missing fasteners, and axle seal leaks.
Check restraint system components. See
.
Safety System Check 0 42.
Lubricate body components. See Exterior
.
Care 0 288.
Check accelerator pedal for damage, high
.
effort, or binding. Replace if needed.
Visually inspect gas strut for signs of
.
wear, cracks, or other damage. Check the
hold open ability of the strut. If the hold
open ability is low, service the gas strut.
See Gas Strut(s) 0 251.
Check tire sealant expiration date,
.
if equipped. See Tire Sealant and
Compressor Kit 0 276.
Advertisement
Chapters
Table of Contents
