Table of Contents
Advertisement
230
Driving and Operating
Charging Override
A CHARGING OVERRIDE/INTERRUPTION
OCCURRED message may display to indicate
that a charging override or interruption has
occurred due to one or more of the
following events:
Override of the charge settings by the
.
owner.
Unintended interruption of AC power at
.
the vehicle's charge port.
Interruption of charging by the utility
.
company.
There are several screens that will display
depending on the current charging status.
See Programmable Charging 0 94.
A loss of AC power alert may sound for a
short time if AC power is lost for over
one minute. This sound alert can be turned
off. See Vehicle Personalization 0 105.
AC Charging
AC Charge Cord Vehicle Plug
Start Charge
1. Make sure the vehicle is parked.
2. Push the rearward edge of the charge
port door and release to open the door.
In cold weather conditions, ice may form
around the charge port door. Remove ice
from the area before attempting to open
or close the charge port door.
Without Super Cruise, With Super Cruise
Similar
3. Open the liftgate, lift the load floor
cover, and remove the charge cord.
4. Plug the charge cord into the electrical
outlet and verify the charge cord status.
For level 1 charging, select the
appropriate charge levels. See Electrical
Requirements for Battery Charging 0 238.
See Charge Cord 0 236. See "Level 1–
120V Cord Limit" under Programmable
Charging 0 94.
5. Plug in the AC vehicle plug of the charge
cord into the charge port on the vehicle.
Make sure the AC vehicle plug is fully
Advertisement
Chapters
Table of Contents
