Washer Fluid; Brakes - Chevrolet Bolt EUV 2022 Owner's Manual

246 Vehicle Care
1. Cabin Heating Coolant Reservoir
2. High Voltage Battery Coolant Reservoir
3. SPIM, APM, and Charger Module
Coolant Reservoir
1. Park on a level surface and turn the
vehicle off.
2. After the system has completely cooled,
check that the coolant level is at the cold
fill mark on the reservoirs.
3. If the coolant level is not visible or needs
to be adjusted within the reservoirs,
contact your dealer.

Washer Fluid

What to Use
When windshield washer fluid is needed, be
sure to read the manufacturer's instructions
before use. If operating the vehicle in an
area where the temperature may fall below
freezing, use a fluid that has sufficient
protection against freezing.
Adding Washer Fluid
Open the cap with the washer symbol on it.
Add washer fluid until the tank is full. See
Underhood Compartment Overview 0 244 for
reservoir location.
Caution
Do not use washer fluid that contains
.
any type of water repellent coating.
This can cause the wiper blades to
chatter or skip.
Caution (Continued)
Do not use engine coolant (antifreeze)
.
in the windshield washer. It can
damage the windshield washer system
and paint.
Do not mix water with ready-to-use
.
washer fluid. Water can cause the
solution to freeze and damage the
washer fluid tank and other parts of
the washer system.
When using concentrated washer fluid,
.
follow the manufacturer instructions
for adding water.
Fill the washer fluid tank only
.
three-quarters full when it is very cold.
This allows for fluid expansion if
freezing occurs, which could damage
the tank if it is completely full.

Brakes

Disc brake linings have built-in wear
indicators that make a high-pitched warning
sound when the brake linings are worn and
new linings are needed. The sound can come
and go or can be heard all the time when
the vehicle is moving, except when applying
(Continued)
the brake pedal firmly.