Windshield Replacement - Chevrolet Bolt EUV 2022 Owner's Manual

250 Vehicle Care
Caution
Allowing the wiper arm to touch the
windshield when no wiper blade is
installed could damage the windshield.
Any damage that occurs would not be
covered by the vehicle warranty. Do not
allow the wiper arm to touch the
windshield.
To replace the windshield wiper blade:
1. Pull the windshield wiper assembly away
from the windshield.
2. Press the button in the middle of the
wiper arm connector, and pull the wiper
blade away from the arm connector.
3. Remove the wiper blade.
4. Reverse Steps 1–3 for wiper blade
replacement.
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm have a
cover for protection. The cover must be
removed before the wiper blade can be
replaced.
To remove the cover:
1. Slide a plastic tool under the cover and
push upward to unsnap.
2. Slide the cover toward the wiper blade
tip to unhook it from the blade
assembly.
3. Remove the cover.
4. After wiper blade replacement, ensure
that the cover hook slides into the slot
in the blade assembly.
5. Snap the cover down to secure.
To replace the wiper blade:
1. Lift the wiper arm away from the
windshield.
2. Push the release lever (2) to disengage
the hook and push the wiper arm (1) out
of the blade assembly (3).
3. Push the new blade assembly securely
on the wiper arm until the release lever
clicks into place.
4. Replace the wiper cover.

Windshield Replacement

Driver Assistance Systems
If the windshield needs to be replaced and
the vehicle is equipped with a front camera
sensor for the Driver Assistance Systems, a
GM replacement windshield is
recommended. The replacement windshield
must be installed according to GM