Retained Accessory Power (Rap); Shifting Into Park - Chevrolet Bolt EUV 2022 Owner's Manual

Restarting Procedure
If the vehicle must be restarted while it is
still moving, press the N (Neutral) switch and
O
press POWER twice without pressing the
brake pedal. The propulsion system will not
restart in any other position.
A chime will sound if the driver door is
opened while the vehicle is on. Always press
O
POWER to turn the vehicle off before
exiting.
Stopping Procedure
For information on how to turn the vehicle
off, see Power Button 0 181.

Retained Accessory Power (RAP)

When the ignition is turned from on to off,
the following features (if equipped) will
continue to function for up to 10 minutes,
or until the driver door is opened. These
features will also work when the ignition is
in RUN or ACC/ACCESSORY:
Infotainment System
.
Power Windows (during RAP this
.
functionality will be lost when any door
is opened)
Sunroof (during RAP this functionality will
.
be lost when any door is opened)
Auxiliary Power Outlet
.
Audio System
.
OnStar System
.

Shifting Into Park

To shift into P (Park):
1. Hold the brake pedal down and set the
parking brake. See "Electric Parking
Brake."
2. Press the P (Park) switch on the center
console.
3. Turn the vehicle off.
If the vehicle is shifted into P (Park) on a
hill, the electric parking brake (EPB) may
apply automatically. The driver may not be
able to release the EPB using the EPB
switch. It should automatically release when
the vehicle is shifted out of P (Park).
Driving and Operating
Leaving the Vehicle with the Propulsion
System On
{
Warning
It is dangerous to get out of the vehicle
if the P (Park) button is not pressed with
the parking brake set. The vehicle
can roll.
Do not leave the vehicle when the
propulsion system is running. If you have
left the propulsion system running, the
vehicle can move suddenly. You or others
could be injured. To be sure the vehicle
will not move, even when you are on
fairly level ground, always set the
parking brake and press the P (Park)
button.
If you have to leave the vehicle with the
propulsion system running, the vehicle must
be in P (Park) with the parking brake set
before leaving the vehicle. After pressing the
P (Park) button, hold down the regular brake
pedal. If you cannot see the P (Park)
indicator in the instrument cluster, the
vehicle has not shifted into P (Park).
183