Delayed Charging Override; Charging Status Feedback - Chevrolet Bolt EUV 2022 Owner's Manual

232 Driving and Operating
7. Verify that the Charging Status Indicator
illuminates on top of the instrument
panel and an audible chirp occurs. See

Charging Status Feedback 0 232.

Caution
Do not attempt to disconnect the DC
vehicle plug while charging is active. This
action may damage the vehicle or
charging station hardware.
Stop Charge
Controls on the charging station can be used
to stop the charge process at any time.
To stop the charge when inside the vehicle,
use the Stop button on the Charging screen,
or press the button on top of the DC vehicle
cord handle.
Stop Charge — Automatic
When the vehicle no longer needs to use
power from the charging station, it will stop
charging and the DC vehicle plug will be
unlocked from the DC charge port.
Energy can still be consumed from the
charging station when the vehicle's displays
and indicators show that the battery is fully
charged. This is to ensure the battery is in
optimal temperature operating range to
maximize vehicle range. See Programmable
Charging 0 94.
End Charge
1. Wait until the charging process has been
fully stopped, the vehicle plug is
unlocked, and the Charging Status
Indicator is solid green or off.
If the vehicle plug does not unlock from
the vehicle charge port after a charge,
contact Roadside Assistance for
assistance. See Roadside Assistance
Program 0 311.
2. Unplug the DC vehicle plug from the DC
charge port on the vehicle and close the
dust cover.
3. Close the charge port door by pressing
firmly until it latches.
4. The Electric Parking Brake should be
manually disengaged before driving the
vehicle.
5. To start another DC charge, remove the
DC vehicle plug and reconnect.

Delayed Charging Override

To temporarily override a delayed charge
event, unplug the charge cord from the
charge port and then plug it back in within
five seconds. A single audible chirp will
sound and charging will begin immediately.
To cancel a temporary override, unplug the
charge cord, wait for 10 seconds, and then
plug the charge cord back in. A double
audible chirp will sound and charging will be
delayed.
See Programmable Charging 0 94 for
advanced charge scheduling options.
Charging Status Feedback