Main→System→Display; Main→System→I/O Config; Main→System→I/O Config→Lan; Main→System→Utilities - Boonton SGX1000 Series Instruction Manual

4.4.4 MAIN→System→Display
Key Beep: Enables and disables the audible key beep.
4.4.5 MAIN→System→I/O Config
GPIB Address: Set and View the current GPIB address in use for instruments
equipped with GPIB option.
4.4.6 MAIN→System→I/O Config→LAN
DHCP/AutoIP: Set the state of DHCP/AutoIP system for the Ethernet port.
If DHCP/AutoIP is enabled (On), the instrument will attempt to obtain its IP
Address and Subnet Mask, a DHCP (dynamic host configuration protocol)
server on the network. If no DHCP server is found, the instrument will select
its own IP Address and Subnet Mask values using the AutoIP protocol.
If DHCP/AutoIP is disabled (Off), the instrument will use the IP Address and
Subnet Mask values that have been set by the user.
IP Address: Set the Internet Protocol (IP) address of the Ethernet
adapter. If DHCP/AutoIP mode is enabled, this menu is read-only.
Subnet Mask: Set the subnet mask for the Ethernet adapter. If
DHCP/AutoIP mode is enabled, this menu is read-only.
MAC Address: Displays the MAC address for the Ethernet adapter. This menu item is read-only.
4.4.7 MAIN→System→Utilities
The Utilities menu displays the system utilities available.
20