4.3.1 Numerical Data Entry
Numerical data is entered by touching the ellipsis icon
parameter to be changed. Selecting the icon brings up an on-screen numeric keypad similar to the one
shown in Figure 4-2.
Figure 4-2. Sweep Mode Start Frequency Numeric Keypad
If numeric values entered are outside of the permissible range for a parameter, the
following pop-up will appear. Simply select the desired action to continue.
4.3.2 Parameter Pick-List Selection
Some parameters use a menu or pick-list of settings to choose from. The Trigger setting in Sweep Mode
seen in Figure 4-3 is an example of a pick-list. Touch the setting to bring up the list and select the setting
to use. The top of the list shows the currently selected setting.
or the numeric pad icon
next to the
17