Table of Contents
Advertisement
2 Installation
This section contains unpacking and repacking instructions, power requirements, connection
descriptions, and preliminary checkout procedures.
2.1 Unpacking & Repacking
The SGX1000 series RF signal generators are shipped complete and are ready to use upon receipt. Figure
2-1 shows you the various pieces included in the packaging and the order in which they are loaded into
the container. Actual details may vary from the illustration.
Note
Save the packing material and container to ship the instrument, if necessary. If the
original materials (or suitable substitute) are not available, contact Boonton Electronics
to purchase replacements. Store materials in a dry environment.
Figure 2-1. Packaging Diagram
Table 2-1. SGX1000 Series RF Signal Generator Packing List
SGX1000 series RF signal generator
Line Cord
Ethernet Cable
Information Card (describes where to download the latest manual, software, utilities)
For benchtop use, choose a clear, uncluttered area. Ensure that there is at least 2" of clearance at the
fan air intake on the rear panel and the exhaust vents on the side panels. Pull-down feet are located on
3
Advertisement
Table of Contents
