Table of Contents
Advertisement
· Click Start to process the firmware upgrade.
· Wait until the status bar is full
· Click on Close button when download is finished
· Download is completed.
Warning: All data will be erased after click the checkbox. Please back up the data before
downloading the firmware.
2. Emergency Mode:
When the player does not function properly, you are required to recover the player by installing
the software for Player Recovery Device
· Switch On the computer
· Switch Off the player
· Connect the player to the computer via the USB cable
· Press and hold PLAY/PAUSE/STOP button more than 5 seconds and enter Firmware
Download at the same time (To enter Firmware Download, click Start and select
Program on Windows Desktop. From Program , select Digital Music Player , then click
on Firmware Download .)
· Your computer will take time to search the hardware (player) for 15 seconds.
· After click Firmware Download , the following box will appear
25
Advertisement
Table of Contents
