Porsche 911 Turbo 2014 Owner's Manual page 166

14_991_Turbo_21.book Seite 164 Mittwoch, 9. April 2014 2:19 14
Driving off again
The vehicle can be driven off again after being
stopped and speed and distance control will be
resumed, depending on the operating state of the
adaptive cruise control system.
Adaptive cruise control active
1. Press the control stalk on the steering wheel
upwards (position 4, RESUME).
2. Press the accelerator pedal briefly.
Your vehicle drives off again automatically.
Information
Your vehicle will not drive off if the vehicle
detected in front is stationary.
Adaptive cruise control is ready
Automatic speed and distance control can only be
resumed when your vehicle is moving.
1. Drive off normally.
2. Press the control stalk on the steering wheel
upwards (position 4, RESUME).
or
Set or change the desired speed.
164
Driving and Driving Safety
Interrupting and resuming cruise control
and distance control
Interrupting cruise control and distance
control – OFF
f
Press the brake pedal.
or
Press the control stalk on the steering wheel
downwards (position 3, OFF).
Adaptive cruise control is inactive.
The desired speed that was stored and the
desired distance are retained.
Resuming cruise control and distance
control – RESUME
f
Press the control stalk on the steering wheel
upwards (position 4, RESUME).
The vehicle accelerates to the desired speed
that was stored unless a vehicle traveling in
front is detected as driving slower than the
desired speed and the distance from this
vehicle is less than the desired distance that
was set.
The status display B changes from grey to
orange.
or
Press the control stalk on the steering wheel
upwards and keep it pressed (position 4,
RESUME).
The vehicle accelerates in a more sporty
driving style to the desired speed that was
stored.
Information
If speed and distance control was interrupted by
moving the control stalk to position 3 (OFF), it can
only be resumed again when the vehicle is moving
and no stationary objects are detected in front.
Messages on the multi-function display
If adaptive cruise control was deactivated
automatically or if an action cannot be performed,
a message to this effect in blue appears on the
multi-function display.
– "ACC not available"
Adaptive cruise control is not available,
e.g. when maneuvering.
– "ACC not possible ABS/PSM intervention"
Adaptive cruise control was deactivated
because ABS or PSM intervened as a control
mechanism.
– "Release parking brake"
Adaptive cruise control was deactivated
because the electric parking brake was
activated.
– "ACC not possible
Move gear lever to D/M"
Adaptive cruise control was deactivated
because the PDK selector lever is not in
position D or manual position M.
– "ACC not possible while stationary"
The required action is not possible because
your vehicle is stationary, e.g. when setting a
desired speed.
– "ACC not possible Revs too high"
Adaptive cruise control was deactivated
because the engine-speed limit was reached in
manual position M of the PDK selector lever/
shift paddles.
– "ACC not possible Gradient too steep"
The desired distance or the desired speed
cannot be set because the incline of the road
is too steep.
– "ACC not possible Stationary object
ahead"
The action is not possible because a stationary
object was detected ahead.