Automatic Anti-Dazzle Interior And Exterior Mirrors - Porsche 911 Turbo 2014 Owner's Manual

Table of Contents

Advertisement

14_991_Turbo_21.book Seite 50 Mittwoch, 9. April 2014 2:19 14
Folding exterior mirrors in and
out electrically
f
Press button D.
Both exterior mirrors fold in and out
automatically.
If the electrical adjustment facility fails
f
Fold mirror in or out manually.
Information
At speeds greater than approx. 30 mph (50 km/
h), the exterior mirrors can no longer be folded in.
Folding exterior mirrors in and out
automatically
The exterior mirrors are folded in automatically
after the vehicle is locked.
Prerequisite:
– The function is activated on the multi-function
display.
Folding exterior mirrors out automatically
f
Switch on ignition.
The exterior mirrors fold out.
Information
The exterior mirrors do not fold out automatically
after the ignition is switched on if they were folded
in manually using the button D.
If the electrical adjustment facility fails
f
Fold the mirror outwards by hand as far as
it will go.
50
Seats, Mirrors and Steering Wheel
Storing exterior mirror settings
On vehicles with memory, individual exterior mirror
settings can be stored on the person buttons on
the driver's side and on the car key.
For further information on retrieving and storing
vehicle settings:
f
PLEASE SEE THE CHAPTER "COMFORT
ENTRY FUNCTION" on page 34.
Exterior mirror heating
The exterior mirror heating is activated
automatically when the heated rear window is
switched on while the engine is running.
For information on switching on the heated rear
window:
f
Please see the chapter "HEATED REAR
WINDOW/ EXTERIOR MIRROR HEATING"
on page 60.
If the charging condition of the battery is critical,
the exterior mirror heating function is restricted
initially and then switched off.
Swivelling down mirror glass as
parking aid
When reverse gear is engaged, the mirror on the
passenger's side swivels down slightly to show
the curb area.
f
Please see the chapter "SWIVELLING DOWN
MIRROR GLASS AS PARKING AID"
on page 210.
Automatic Anti-Dazzle Interior and
Exterior Mirrors
The interior mirror's reflection is undistorted.
Sensors on the front and rear sides of the interior
mirror measure the incident light. The mirror
automatically changes to anti-dazzle position or
reverts to its normal state, depending on the light
intensity.
Information
The incident light within the detection area of light
sensor C must not be restricted (e.g. by stickers
on the rear window).
Switching off automatic anti-dazzle function
f
Press button B.
The indicator light A goes out.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents