Audio Menu - Porsche 911 Turbo 2014 Owner's Manual

14_991_Turbo_21.book Seite 102 Mittwoch, 9. April 2014 2:19 14
Measuring the oil level after topping up
engine oil or opening the engine
compartment lid
The oil level can be checked after waiting for
approx. 1 minute with the vehicle parked on a level
surface and the engine at operating temperature.
If the engine compartment lid is opened when the
engine is cold (e.g. in order to top up engine oil),
the oil level cannot be displayed for a certain time.
The message "No information about oil level
available at present" appears on the multi-
function display.
f
Engine oil should therefore only be topped
up with the engine at operating temperature.
This ensures short waiting times for the
soonest possible oil level display.
Failure
If the oil-level indicator fails, the message "Oil
level measurement fault Consult a workshop
Driving permitted" appears on the multi-function
display.
Setting speed limits
If a speed limit is preset and activated on the
multi-function display, a warning message appears
if the speed limit is exceeded.
A speed limit can be used to remind the driver to
keep to the maximum speed permitted for the tire
type fitted to the vehicle, for example.
1. Main menu "Vehicle"
> "Limits"
and confirm.
102
Instrument Panel and Multi-Function Display
Setting a speed limit
1. Main menu "Vehicle"
> "Limits"
2. Select "Limit 1: ---" or
"Limit 2: ---"
and confirm.
3. Select "Current speed" or
„---"
and confirm.
You can either adopt the current speed of the
vehicle or specify your own speed limit.
Activating and deactivating speed limits
1. Main menu "Vehicle"
> "Limits"
2. Select "Limit 1: ---" or
"Limit 2: ---"
and confirm.
3. Select "Active"
4. Confirm your selection.
Limit is active.
Limit is not active.
Adjusting vehicle settings
Various vehicle settings can be modified in the
"Settings" submenu.
For information on modifying vehicle settings:
f
Please see the chapter "VEHICLE SETTINGS
ON THE MULTI-FUNCTION DISPLAY"
on page 117.

Audio Menu

In the "Audio" main menu, you can select a radio
station either from the station list or the list of
stored stations, depending on the settings, or a
track from the active audio source, e.g. disk.
1. Select "Audio" in the main menu
and confirm.
2. Select the desired radio station or track
and confirm.
For information on adjusting audio menu settings:
f
Please see the chapter "ADAPTING DISPLAY
CONTENTS OF AUDIO MAIN MENU"
on page 118.