Audio-Related And Other Issues - Yamaha AG03MK2 User Manual

Troubleshooting > Audio-related and other issues

Audio-related and other issues

Your Windows PC does not recognize this product
(
Have you installed the driver?
You must install the Yamaha Steinberg USB Driver if you wish to connect this product to a Windows PC.
(
See the following website for how to install the Yamaha Steinberg USB Driver.
AG03MK2:
https://www.yamaha.com/2/ag03mk2/
AG06MK2:
https://www.yamaha.com/2/ag06mk2/
No sound is heard
(
Are you using the appropriate settings for the [STREAMING OUT] selector switchD?
Referring to the names and functions of each component, set the [STREAMING OUT] selector switch as
(
appropriate for your use case.
(
Are any external devices (such as a mic) or powered monitor speakers connected correctly?
(
Are the connecting cables shorted out or otherwise disconnected?
(
Have you turned on the power of any connected electronic instruments or powered monitor
speakers?
(
Is the [GAIN] knob m, the level knob t, the fader
the headphone [H] knob
(
Is the [LINE] switch f, [GAIN HIGH LOW] switch
(AG06MK2 only) set to on (O)?
Turn these switches off (N). If the volume from the sound source is too low, you may not be able to
(
hear the sound when these switches are set to on (O).
(
Is the [MIX MINUS]
(
If you are using Internet livestreaming software, have you adjusted the volume in the software?
Sound is distorted or noisy
(
Is the channel [PEAK] LED
Try lowering the [GAIN] knob and turning the [PAD] switch on (O).
(
(
Are the [PEAK] indicators on the level meters
Adjust the level knobs for each channel. The [PEAK] indicator on the level meter will not go dark even if
(
you lower the levels of the speaker [S] knob or headphone [H] knob.
(
Are the levels set too high on the devices connected to this product?
Lower the volume of the connected devices.
(
(
Is the [LINE] switch f, [GAIN HIGH LOW] switch
(AG06MK2) set to off (N)?
Turn these switches on (O). If the volume from the sound source is too high, the sound may distort
(
when these switches are set to off (N).
G
adjusted appropriately?
E
switch turned on (O)?
r
on?
s
(AG03MK2 only), the speaker [S] knob
k
(AG03MK2 only) and the [HIGH LOW] switch
C
lit up red?
k
(AG03MK2 only) and the [HIGH LOW] switch
65
F
and
l
l