Table of Contents
Advertisement
Parts and Their Functions
BRIGHT (Brightness) Knob
5
Adjusts the brightness of the screen inside the viewfinder. The setting of this control has
no effect on the output signal of the camera.
6
Front Tally Lamp
Lights when the VTR is recording and the TALLY switch is set to HIGH or LOW. Also,
flashes on and off as a warning indication, in the same manner as the REC lamp, inside
the viewfinder.
The brightness of the front tally lamp is controlled by the setting of the TALLY switch
(HIGH or LOW).
Viewfinder Forward-Backward/Left-Right Position Clamp Lever
7
Loosen this lever to adjust the viewfinder position in the forward, backward, right or left
direction.
Eyepiece
8
Back Tally Lamp
9
Lights when the VCR is recording. Also, flashes on and off as a warning indication, in
the same manner as the REC lamp inside the viewfinder.
The back tally lamp is hidden when the lever is in the OFF position.
:
Diopter Adjustment Ring
Adjust this control to match the vision of the person using the camera so that the image
on the screen in the viewfinder is as clear as possible.
;
Connection Plug
Lock Ring
<
Microphone Holder
=
E– 5
Advertisement
Table of Contents
