Network Installation; Set The Ip Address Of The Terminal; Set The Subnet Mask Of The Terminal; Set The Default Gateway Of The Terminal - Computime TIMEVISION PLUS FACESCAN Manual

T V P F
IME ISION LUS ACE

Network Installation

If you are planning to download via USB, please skip this section.
If you are planning to download over the network, you will need to configure your clocking
terminal on your network. Before continuing, you will need the following:
 A unique static IP address on your network for the terminal to use
 Your network's subnet mask
 The default gateway on your network
If you are unsure of this information, please contact your IT.

Set the IP Address of the Terminal

Press 'Menu'.

Press 'Comm'.

Press 'IP Address'.

Type the IP address.

You can use the
When you are done, press 'OK'. To cancel changes, press the red 'X'.

To save, press 'Save'. To exit without saving changes, press 'Exit'.


Set the Subnet Mask of the Terminal

Press 'Menu'.

Press 'Comm'.

Press 'Subnet

Type the subnet mask.

You can use the
When you are done, press 'OK'. To cancel changes, press the red 'X'.

To save, press 'Save'. To exit without saving changes, press 'Exit'.


Set the Default Gateway of the Terminal

Press 'Menu'.

Press 'Comm'.

Press 'Gateway'.

Type the default gateway.

You can use the
When you are done, press 'OK'. To cancel changes, press the red 'X'.

To save, press 'Save'. To exit without saving changes, press 'Exit'.

S M
CAN ANUAL
'←' arrow to delete a single number, or
Mask'.
'←' arrow to delete a single number, or
'←' arrow to delete a single number, or
'C' to clear everything.
'C' to clear everything.
'C' to clear everything.
P
AGE
8 | 28