Installing The Clocking Terminal - Computime TIMEVISION PLUS FACESCAN Manual

T V P F
IME ISION LUS ACE

Installing the Clocking Terminal

Step 1
Step 2
 Align the wall mounted base to the holes on the wall, and use three screws to fix it on to
the wall (figure
 Align the iron board to the holes on the wall mounted base, and use four screws to fix it
on to the wall mounted base
 Connect the device with the iron board (from the top down) to ensure it is tightly jointed
with the board
 Finally, use one screw to fix the device and the iron board
S M
CAN ANUAL
Affix the paper template to the wall and drill three holes
within the three marked circles on the paper template.
We recommend affixing the template about 3.6 feet (1.1m)
above the ground, assuming the average height of your
users is 5-6 feet tall (1.55m-1.85m). If the average body
height of your users is over 5.4 feet (1.65m), consider
installing the terminal 4 feet (1.65m) above the ground.
1).
(figure 2).
(figure 3).
(figure 4).
P
AGE
7 | 28