Step 1: Hardware Installation; Locating The Clocking Terminal - Computime TIMEVISION PLUS FACESCAN Manual

T V P F
IME ISION LUS ACE

Step 1: Hardware Installation

Locating the Clocking Terminal

Site the terminal indoors and away from extremes of heat, dust, vibration and fumes. It should
be protected from excessive condensation.
 If the terminal is being installed outdoors, ensure that it is not in direct sunlight.
 If the terminal is being installed indoors, ensure it is at least
windows, and at least
Choose a location that allows room for normal use and access for maintenance.
A 3-pin mains socket is required for the terminal's AC adapter. For network installations, a
network point is also required.
Recommended Locations:
NOT Recommended Locations:
S M
CAN ANUAL
6.5 feet (2m) away from light fixtures.
10 feet (3m) away from
P 6 | 28
AGE