Table of Contents
Advertisement
T
V
P
F
IME
ISION
LUS
ACE
Step 8: Employee Setup
From the main screen, click on 'Employees'.
From the Employee Setup screen, click on 'New'.
Fill in the required fields. When you have finished making changes, click 'Save'.
The
'User ID'
enrol the employee on the clocking terminal, but
were enrolled as 000001, in the software their user ID would be 1.)
The
'RF Card ID'
user ID, you do not need to include the leading zeroes.
Ensure the
'Start Date'
their card/fob to clock in and out, as the card will be activated at midnight on that day.
Every employee must be assigned to a 'Group',
to do so will corrupt the clocking data.
S
M
CAN
ANUAL
should correspond with the same user ID number which was used to
field is the first long number on the user's card/fob – and as with the
is set to the day before you want the employee to begin using
THE SYSTEM IS NOW READY TO BE USED
without leading
zeroes. (e.g. if they
'Department'
and
'Job
Post'. Failure
P
20 | 28
AGE
Advertisement
Table of Contents
