Step 5: System Setup; For Network Installations; For Usb Downloads - Computime TIMEVISION PLUS FACESCAN Manual

T V P F
IME ISION LUS ACE

Step 5: System Setup

You now need to configure the connection to the clocking terminal. These settings depend on
how the clocking terminal was installed.
 From the Setup menu, click on 'Settings'.
 Click on 'New'.

For Network Installations


Select 'TCP/IP'
 Enter the IP address of the clocking terminal. You should already have allocated a
suitable IP address to the device when installing the clocking terminal. The IP address
you chose should be entered here.
 Select 'ZK' from the Terminal Type dropdown menu.
 Ensure 'Face Scan'
 Click on 'Save'.

For USB Downloads

 Select 'USB' connection.
 Select 'ZK' from the Terminal Type dropdown menu.

Ensure 'Face Scan'
 Click on 'Save'.
The terminal communication settings are now configured.
S M
CAN ANUAL
connection.
is ticked.
is ticked.
P 17 | 28
AGE