Iiyama PLE1700S Service Manual page 20

All manuals and user guides at all-guides.com
PLE1700S Service Manual
INVERTER
In order to drive the CCFLs embedded in the panel module, there is a half bridge inverter to convert by
the controller.
The input 12V up to hundreds of AC voltage output.
The inverter is formed by symmetric in order to drive the separate lamp modules.
The input stage consists of a PWM controller, half bridge inverter, and switching MOSFET to convert
DC input into AC output.
The output stage consists of a tuning capacitor, coupling capacitor, transformer, push-pull MOSFET
pair to boost AC output up to hundreds of voltage.
And one resister is serial to lamp for output voltage feedback.
There are two signal to control the inverter which come from system.
Logic "high" level which send to I901 is turn on the inverter.
BRI signal control brightness by DC level which was integral from PWM signal.
AUDIO
General description
The TDA7496L is a stereo 2W+2W class AB
power amplifier assembled in the @ Powerdip
14+3+3 package, specially designed for high
quality sound, TV and Monitor applications.
Features of the TDA7496L include linear volume
control, Stand-by and mute functions
Ipeak Output Peak Current (internally limited) 0.7 0.9 A
Vin Input Signal 2.8 Vrms
GV Closed Loop Gain Vol Ctrl > 4.5V 28.5 30 31.5 dB
GvLine Monitor Out Gain Vol Ctrl > 4.5V; Zload > 30K  -1.5 0 1.5 dB
AMin VOL Attenuation at Minimum Volume Vol Ctrl < 0.5V 80 dB
BW 0.6 MHz
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Value Unit
VS DC Supply Voltage 26 V
VIN Maximum Input Voltage 8 Vpp
Ptot Total Power Dissipation (Tcase = 60°C) 6 W
Tamb Ambient Operating Temperature 0 to 70 °C
Tstg, Tj Storage and Junction Temperature -40 to 150 °C
V6 Volume CTRL DC voltage 7 V
0 4 8 12 Area(cm2)
-19-
05/12/2006