Setup; Setting Day And Time - Hunter 44377 Owner's Manual

Setup

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the current day
and time.
1. You will notice that "Mon" will be flashing at the top left of your screen. Use the
or buttons to move to your current day of the week and press the
advance to the next step.
2. Use the or
3. Next you will select your current hour by using the
advances you to the next step.
4. Set your minutes using the
make a correction to a previous step.
5. When finished, the thermostat will show "Updated!" to confirm your settings are
saved.
6. Your thermostat will next prompt you to set your programming, see page 14 step 2 if
you wish to alter your programs at this time.
10
button to change between am and pm. Choose
or and press
44040-01 • 05/11/2010
4
or
to finish or
Done/
Home
button to
Next
to advance.
Next
buttons. The button
Next
if you need to
Back