Hunter Illumi-Heat Installation Instructions Manual page 5

I N S TA L L AT I O N
5) Swing the Fixture up so that the two Hanger Bolts exit their associated holes. See Figure 8.
NOTE: For clarity, the
electrical box and wires
Hanger Bolt (2)
have been omitted from
this illustration.
Swing fixture up
Figure 8 - Positioning the Fixture
43533-01 05/28/2008
c o n t i n u e d
8
I N S TA L L AT I O N
6) Position the Acorn Nuts over the Hanger Bolts, and tighten the Acorn Nuts until tight. See
Figure 9.
Figure 9 - Acorn Nut Installation
7) Install three 40-watt Candelabra light bulbs (not included) as shown in Figure 10.
40-watt Candelabra Ligh Bulbs (not included)
Figure 10 - Install Light Bulbs
c o n t i n u e d
Bolts
Nut
9 43533-01 05/28/2008