Chronograph Functions; Use Of The Chronograph - Victorinox CHRONOGRAPH CALIBRE ETA 251.262 Instructions Manual

Chronograph functions

II. CHRONOGRAPH FUNCTIONS

USE OF THE CHRONOGRAPH

Single Event:
1. Press pusher A to start the chronograph.
2 Press pusher A again to stop the chronograph.
3. Press pusher B to reset to zero.
ADD function (additional timings: each time you
stop the counter, the time is stopped and does not
take into consideration the elapsed time):
1. Press pusher A to start the chronograph.
2. Press pusher A to stop the chronograph and read the time.
3. Press pusher A again and read the additional timing... and so on.
4. Press pusher B to reset to zero.
SPLIT function (the split time function is used to display an intermediate time while
continuing timing). This function is not available for mechanical chronographs:
1. Press pusher A to start the chronograph.
2. Press pusher B to display an intermediate time, the chronograph will continue
timing.
3. Press pusher B again to catch up with timing.
4. Press pusher A to end the timing.
5. Press pusher B to reset to zero.
English
A
B
5