Table of Contents
Advertisement
After the DIN-rail bracket is secured on the IPS, connected it to the rail as shown
below.
2.3.3
POWER cable & Control Cable Installation
Connect cables after installation of the IPS. Below we use the example of an Advan-
tech Panel PC as a loading machine. If customers use another PC as a loading
machine, install the Power cable and PS_ON cable according to the other machines
connector pin definitions.
2.3.3.1
Making the Power cable
1.
Take the power cable from the accessory bag.
Figure 2.5 Attaching the IPS to a DIN Rail
Figure 2.6 Power Cable Photo
11
PPC-IPS User Manual
Advertisement
Table of Contents
