Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech POC-IPSM90PS
Summary of Contents for Advantech POC-IPSM90PS
- Page 1 User Manual POC-IPSM90PS Point-of-Care Intelligent Power System...
- Page 2 Note! A NOTE provides additional information intended to avoid inconve- nience during operation. Part No. 200890PS00 Edition 1 Printed in Taiwan December 2019 POC-IPSM90PS User Manual...
- Page 3 30 days to maintain the maximum life expectancy of the battery. DISCLAIMER: These instructions are provided in accordance with the IEC 704-1 specifications. Advantech disclaims all responsibility for the accuracy of any state- ments contained herein. POC-IPSM90PS User Manual...
- Page 4 Explanation of Graphical Symbols IEC 60878 and ISO 3864-B.3.6: Warning: dangerous voltage ISO 7000-0434: Caution, consult accompanying documents IEC 60417 -5009: Standby IEC 60417-5032: Alternating current IEC 60417-5021: Equipotentiality ISO 7010-M002: Follow instructions for use IEC 60417-5021: Earth (ground) POC-IPSM90PS User Manual...
- Page 5 Consult the dealer or an experienced radio/TV technician for help Warning! Any changes or modifications made to the equipment that are not expressly approved by the relevant standards authority could void your authority to operate the equipment. POC-IPSM90PS User Manual...
- Page 6 Otherwise, the correct func- tioning of the device may be compromised. Additional Information and Assistance Contact your distributor, sales representative, or Advantech's customer service cen- ter for technical support if you require additional assistance. Please have the follow- ing information ready before calling: ...
-
Page 7: Table Of Contents
Contents Chapter General Information ......1 Introduction ....................2 Specifications .................... 2 Table 1.1: POC-IPSM90PS Intelligent Power System ....2 Dimensions ....................4 Chapter System Setup ........7 Quick Tour....................8 2.1.1 Front view ..................8 Figure 2.1 POC-IPSM90PS Front View........8 2.1.2... - Page 8 POC-IPSM90PS User Manual viii...
-
Page 9: Chapter 1 General Information
Chapter General Information... -
Page 10: Introduction
Advantech’s POC-IPSM90PS is an intelligent power system designed to provide DC power to various devices in a mobile environment. Based on a lithium-ion battery (LIB), POC-IPSM90PS offers a greater battery capacity in a more lightweight design compared to traditional battery pack systems (lead acid). LIB batteries are also safer and more stable and clean than any other type of battery. - Page 11 Battery pack: capacity 70%, 300 cycles or 1 year (depending on which occurs first) < 4 kg/8.81 lb Weight Weight (POC-IPSM90PS with three battery packs) 563.8 x 125 x 76.5 mm/22.19 x 4.92 x 3.01 Dimensions Dimensions (W x D x H) Power system: IEC60601-1-2, fourth edi-...
-
Page 12: Dimensions
Dimensions The system dimensions are 563.5 x 125 x 76.5 mm/22.18 x 5.52 x 3.01 in. (Unit: mm) POC-IPSM90PS User Manual... - Page 13 POC-IPSM90PS User Manual...
- Page 14 POC-IPSM90PS User Manual...
-
Page 15: Chapter 2 System Setup
Chapter System Setup... -
Page 16: Quick Tour
Quick Tour Before setting up the POC-IPSM90PS intelligent power system, take a moment to familiarize yourself with the various functions of the system connectors, switches, and ports (which are shown below). 2.1.1 Front view VESA mount holes Figure 2.1 POC-IPSM90PS Front View 2.1.2... -
Page 17: Side View
2.1.4 Side View Power On/Off button Battery slot Battery slot VOUT Voltage setting switch Figure 2.4 POC-IPSM90PS Side View Power Input/Output Specifications Table 2.1: DC-In/DC-Out Specifications Note Rating: 19V input DC-In Adapter: Delta MDS-150AAS19 BJ (19V/150W) 12V/17V/19V/24V According to switch... -
Page 18: Dc-In Pin Definition
The following SW1 settings are printed on the enclosure cover for users to reference before adjustment. The 19V output setting is as shown below. 2.2.1 DC-IN Pin Definition DC-In uses Amphenol A00-MSAS-05PMR-SF703 (male pin type). Pin Number Function Note Return/GND Return/GND DC In DC In DC In Sleeve/Ring Return/GND POC-IPSM90PS User Manual... -
Page 19: Dc-Out Pin Definition
2.2.2 DC-Out Pin Definition DC-Out uses Amphenol A00-MSAS-05PFR-SF703 (female hole type). Pin Number Function Note Return/GND Return/GND DC Out DC Out DC Out Sleeve/Ring Return/GND Note! Confirm the “key” direction to identify pin 1. COM Output Specifications POC-IPSM90PS User Manual... -
Page 20: Com Pin Definition
Confirm the “key” direction to identify pin 1. Installation Procedures Before installing the POC-IPSM90PS power system onto a POC terminal or using POC-IPSM90PS to supply power, perform a complete battery charge. Next follow the steps below to install and setup the system. - Page 21 Slide the POC-IPSM90PS power system onto the AMiS arm. The POC-IPSM90PS VESA bracket will fit the AMiS arm. Use four screws to affix the POC-IPSM90PS system to the POC terminal and AMiS arm. (B) If installing the POC-IPSM90PS system onto a stand, follow the instructions pro- vided below.
- Page 22 Step 3: Connect the DC-In, DC-Out, and COM cables from the POC-IPSM90PS to the DC-In, DC-Out, and COM ports of the POC terminal. Step 4: Turn the cable screw lock clockwise to lock the three cables into their sockets (the cable plug type may differ from that included with the product).
- Page 23 Step 5: Insert batteries into the POC-IPSM90PS power system. Note! Lay the pull ring and mylar (indicated in the image below) flat in their original position before closing the door. Caution! We recommend holding the battery with both hands when inserting into the POC-IPSM90PS power system.
- Page 24 Power On indicator will emit a green light. Caution! Do not adjust the VOUT voltage setting switch when the power is turned on (green LED) or the POC-IPSM90PS system is in use as this may damage the components and/or POC terminal.
-
Page 25: Chapter 3 Battery Maintenance
Chapter Battery Maintenance... -
Page 26: Regular Use
48 hours (2 days) to maintain the battery life. If the POC-IPSM90PS power system is not in use, turn off the system to save battery power. To turn off the system, simply press the Power On/Off button (circled in red below). -
Page 27: Battery Storage
If using the internal battery power, check that the battery is installed correctly and has sufficient charge. To check the battery charge level, remove the battery pack and press the battery capacity status button on the battery pack. POC-IPSM90PS User Manual... - Page 28 Check that the COM cable (right port) is connected and the screw lock is fastened tightly (the cable plug type may differ from that included with the product). b) Check the system software/battery app COM port settings.The system soft- ware/battery app config.ini file determines the COM port used. POC-IPSM90PS User Manual...
- Page 29 NOTE: With this battery design, the charge capacity must be under 98% for the charging function to be initialized. This eliminates the need for frequent charging. In other words, if the battery capacity is 99% or 100%, the battery charging function will not be activated. POC-IPSM90PS User Manual...
- Page 30 POC-IPSM90PS User Manual...
-
Page 31: Chapter 4 Operating And Safety Information
Chapter Operating and Safety information... -
Page 32: General Safety Guide
Never place anything on the equipment before turning the system off. Never turn on the equipment if any of the internal or external components have been removed. Using the equipment when open or missing components may damage the equipment. POC-IPSM90PS User Manual... -
Page 33: Proper Handling
Hold the battery with both hands when installing, removing, or replacing a battery pack. Warning! Do not attempt to use the POC-IPSM90PS power system if it is damaged (for example, the case is cracked or broken) as this may cause injury. -
Page 34: Battery Safety Instructions
Warning! Batteries installed in the wrong direction with the opposite polarity are at risk of exploding, which may cause fire. Only use the specific li-ion battery charger provided by Advantech to charge the battery pack. Warning! Using a battery charger of a different brand may cause the battery to explode and result in fire. - Page 35 Do not discharge the battery pack using any device other than the POC-IPSM90 power system or a device specified by Advantech. Warning! Using the battery pack to power devices other than the POC-IPSM90 power system may damage the battery, limit performance, or reduce the battery life capacity.
-
Page 36: Emergency Scenarios
Warning! 1) if any of the above conditions are observed, place the battery pack and charger outside on a concrete floor, away from any flammable materials for approximately 15 minutes and contact Advantech. Do not attempt to reuse the battery pack. -
Page 37: Battery Disposal
Harmonic emissions domestic establishments and those directly IEC 61000-3-2 connected to the public low-voltage power supply network that supplies buildings used Voltage fluctuations & for domestic purposes. flicker emissions IEC 61000-3-3 POC-IPSM90PS User Manual... - Page 38 <5% UT <5% UT ible power supply or a battery. (>95% dip in UT) (>95% dip in UT) for 5 sec for 5 sec NOTE UT is the a.c. mains voltage prior to application of the test level. POC-IPSM90PS User Manual...
- Page 39 POC-IPSM90PS User Manual...
- Page 40 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2019...