Download Print this page

How To Install - Zephir ZMW1900B Instruction Manual

Wall convector heater

Advertisement

Available languages

Available languages

Do not heat, open, puncture, shred or dispose of batteries in fire.
Do not mix old and new batteries or different types (for example, the carbon-zinc and
alkaline batteries)
Do not leave metal objects that can come into contact with the battery terminals and then
may become hot and / or cause burns.
TECHNICAL SPECS:
Voltage: 220-240V~50Hz
Potenza: 2000W

HOW TO INSTALL:

1. Product cover
2. Air inlet
3. Control Panel
4. Air Outlet (Grid)
5. Remote Controller
6. Screws and dowels
• This product is designed to be used exclusively as wall mounted.
• It is recommended to install the unit to the wall as indicated below and in any case at 180cm of
height from the floor.
• Make sure that the hot air does not blow directly towards flammable materials such as curtains
or other.

Advertisement

loading