Axis C2005 User Manual page 7

AXIS C2005 Network Ceiling Speaker
Additional settings
Note
Some email providers have security filters that prevent users from receiving or viewing large attachments, from
receiving scheduled emails and similar. Check the email provider's security policy to avoid delivery problems and
locked email accounts.
2.8 Click Save.
3. Set up the automated speaker test:
3.1
3.2
3.3
3.4 Under Condition, select Schedule and select from the trigger list
3.5
3.6
3.7 Click Save.
4. Set up the condition for sending an email when the speaker test fails:
4.1
4.2
4.3
4.4 Under Condition, select Speaker test result.
4.5 Under Speaker test status, select Didn't pass the test.
4.6
4.7
4.8
Play audio when a camera detects motion
This example explains how to set up the audio device to play an audio clip when an Axis network camera detects motion.
Prerequisites
• The Axis audio device and Axis network camera are located on the same network.
• The audio clip stored on the Axis audio device.
• The motion detection application is configured and running in the camera.
Prepare an audio clip link:
1. Go to the device interface of the speaker, by entering its IP address in a web browser.
2. Go to Audio > Audio clips.
3. Click
4. Set the volume and number of times to repeat the clip.
Go to the device interface > System > Events > Rules.
Click Add a rule.
Enter a name for the rule.
Under Schedule, select your schedule ("Daily at 6pm").
Under Action, select Run automatic speaker test.
Go to the device interface > System > Events > Rules.
Click Add a rule.
Enter a name for the rule.
Under Action, select Send notification to email.
Under Recipient, select your recipient ("Speaker test recipients")
Enter a subject and a message, and click Save.
> Create link for the clip you want to use.
7