Errors - Qwic Atlas Manual

7.2 Error codes
Your bike is equipped with a self-diagnosis tool to identify potential
issues early on. In case an error has been reported by the system the
maintenance symbol on the display will light up. It will be accompanied
by an error code in the journey data field (located in the bottom right
corner). Using the bike while an error is displayed will not harm the
bike. The most frequently occurring errors can quite often be solved by
yourself:
Error code Answer
Code 48
The speed is monitored by a small magnet on the rear
Speedsensor error
wheel and a sensor on the frame. Please check if the
magnet is aligned well with the round black sensor.
Code 64, 66 or 67
Check if the battery is sufficiently charged. Recharge
Battery voltage too low
the battery if necessary.
Your e-bike is running to hot. Please let it cool down a
Code 80
little bit before continuing your journey. Contact your
High temperature
dealer if this problem persists.
It is possible that other errors are detected in the system, or that the
above instructions do not help. In this case, please contact your dealer.
50
7. TROUBLESHOOTING