Front Fork; Seatpost Suspension - Qwic Atlas Manual

5.4. Front fork

The e-bike is equipped with a suspension fork that has lock-out
functi onality. To temporarily switch off the suspension in the fork, for
example when cycling at high speeds, you can turn the speed lock butt on
located on the right side of the fork clockwise. This will increase the
effi ciency of the e-bike at the expense of comfort.
It is possible to adjust the fork to your weight by infl ati ng/defl ati ng it
with a special fork-pump. Use the table as a reference to adjust the
pressure to your weight for the most comfortable riding experience.
Never exceed a pressure of 120PSI. You can also adjust the rebound
speed with the knob under the right leg. This will determine the speed
of which the fork will rebound aft er it has hit a obstacle.
44
RIDERS WEIGHT(KG) RECOMMENDED
PRESSURE (PSI)
<55 40-55
55-65 55-65
65-75 65-75
75-85 75-85
85-95 85-100
95+ 100+
FACTORY SETTING 80PSI
MAX PRESSURE 120PSI
bell Do not use a regular bicycle pump in this case as you may
permanently damage the fork. Consult your dealer in case
of doubt

5.5. Seatpost suspension

It is also possible to adjust the spring load of the seatpost suspension.
First loosen the seat clamp and take the seatpost out of the frame. The
silver bus on the bott om side of the seatpost can be rotated in the black
outer tube to adjust the suspension.
Use an Allen key and rotate clockwise to
ti ghten the suspension or rotate counter-
clockwise to loosen the suspension.
bell Please make sure that the silver bus
never protrudes the edge of the
black outer tube. If the silver bus is
loosened too far, it can break loose
due to pressure from the spring.
5. COMPONENTS