GE JCAS745 Owner's Manual And Installation Instructions page 88

Before you call for service...
Problem
Food does not broil prop-
erly
Control signals after en-
tering cooking time or de-
lay start
Display flashes "bAd" then
"linE" with a loud tone.
88
Possible Causes
Oven is not set to BROIL.
Door not open to the broil stop posi-
tion as recommended.
Improper shelf position being used.
Food being cooked in a hot pan.
Cookware not suited for broiling.
Aluminium foil used on the broiling
pan and grid has not been fitted prop-
erly and slit as recommended.
In some areas the power (voltage)
may be low.
You forgot to enter a bake tempera-
ture or cleaning time.
The installed connection from the
house to the unit is miswired.
What To Do
• On models with a temperature knob, make sure you turn it all
the way to the BROIL position. On models with a BROIL pad,
make sure it is turned on.
• See the Using the oven section.
• See the Broiling guide.
• Use the broiling pan and grid that came with your range. Make
sure it is cool.
• Use the broiling pan and grid that came with your range.
• See the Using the oven section.
• Preheat the broil element for 10 minutes.
• Broil for the longest, period of time recommended in the Broil-
ing guide.
• Press the BAKE pad and desired temperature or the CLEAN pad
and desired clean time.
• Contact installer or electrician to correct miswired.