GE JCAS745 Owner's Manual And Installation Instructions page 64

Special features of your oven control.
BROIL
BAKE
HI/LO
COOK
TIME
START
BROIL
BAKE
HI/LO
START
64
Cook and Hold
You new control has a cook and hold feature that
keeps cooked foods warm for to up to 3 hours af-
ter Timed Baking or Roasting is finished.
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting (See the Us-
ing the timed baking and roasting features sec-
tion). After Timed Baking or Roasting has auto-
matically stopped, the programmed Cook and
Hold will automatically start.
To activate this feature for use after Timed Bak-
ing or Roasting, follow the steps bellow.
1. Touch the BAKE and BROIL HI/LO pads at the
same time for 3 seconds until the display
shows SF.
2. Touch the COOK TIME pad. The display will
show Hid OFF.
Touch the COOK TIME pad again to activate
the feature. The display will show Hid ON.
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time
or temperature, you may notice the display
changes slowly. This special feature allows you
to change the speed. To set the speed you prefer
follow the steps below.
1. Touch the BAKE and BROIL HI/LO pads at the
same time for 3 seconds until the display
shows SF.
2. Touch the + pad. The display will show you a
set speed between 1 and 5.
3. Touch the + pad to increase the speed up to
the number 5.
Touch the – pad to decrease the speed down
to the number 1.
4. Touch START to activate the setting and leave
the control set in this special mode.
3. Touch the START pad to activate the cook and
hold feature and leave the control set in this
special features mode.