Sony CMA-87 Operating Instructions Manual page 42

Location and Function of Parts and Controls
2 BALANCE control
Adjusts the signal level balance of video signals 1 and 2.
3 CAMERA connector (6-pin)
Connects to the LENS connector of the camera module.
This connector outputs a control signal.
The pin configuration is as follows.
1 6
2 5
3 4
4 VGA / S VGA connector (D-sub 15-pin)
Outputs the VGA or S VGA signal.
The pin configuration is as follows.
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
42
Pin no. Signal
1 Control output
2 Trigger output
3 Ground
4 Hi-HD output
5 —
6 —
Pin no. Signal
1 Video output
2 Video output
3 Video output
4 —
5 Ground
6 Ground
7 Ground
8 Ground
5 OUTPUT SEL (signal output mode select) switch
Selects an output format of the video signal.
EIA: Outputs the EIA signal from the DC IN/SYNC/
VIDEO connector.
VGA/S VGA: Outputs the VGA or S VGA signal from
the VGA/S VGA connector.
CCIR: Outputs the CCIR signal from the DC IN/SYNC/
VIDEO connector.
6 TRIG IN (trigger pulse input) connector (BNC-type)
Connects to such as the image processing system, and reads
the trigger pulse from an external equipment.
Pin no. Signal
9 —
10 Ground
11 —
12 —
13 HD output
14 VD output
15 —