Manitowoc iAuCS Installation, Use & Care Manual page 9

Section 2
4. Install Y connector through the hole in the ice
machine base. Connect the clear vinyl tubing to one
side of the Y branch, the other side is for the plug
removed in step 3.
Insert Y
connector
with tubing
Top View
Install plug
removed in
Step 3
Y-Connector
5. Determine the amount of tubing required in the
AuCS control box and cut off the excess tubing.
6. Slide the tubing on the AuCS® pump.
Slide the tubing
on the iAuCS®
pump.
Part Number 000009036 3/12
Route tubing
to this area
Connect
tubing
Into Base of
Ice Machine
Installation Instructions
9