D-Link DWL-8710AP Quick Installation Manual page 11

4. Choose the location where you want to mount the AP and place the strap around the pole. Tighten and
lock the strap to secure the pole mount bracket with the AP to the pole.
5. Remove the protective caps covering the antenna ports on the AP, if any. Next, attach the 2 antennas
marked "2.4 GHz" to the designated 2.4 GHz connectors and the 2 antennas marked "5 GHz" to the
designated 5 GHz connectors on the AP. The DWL-8710AP is now ready to be connected to the network.