Configure Your Appliance - Check Point QUANTUM LIGHTSPEED Quick Start Manual

3

CONFIGURE YOUR APPLIANCE

1. Launch the Web browser and enter https://192.168.1.1 in the address bar.
Note – You might receive a certificate error page due to a known,
unresolved browser conflict. Click Continue to this Web site.
2. Log in with the default system administrator login name/password,
admin/admin, and click Login.
Note – Popups must always be allowed on https://<appliance_ip_address>.
• The First Time Configuration Wizard will begin automatically.
• The wizard will guide you through the connection setup process.
Enter the parameters as required.
Go to Documentation for
Check Point Appliances (sk96246):
•
•
For more information on setting
up your appliance, search for your
appliance model in the Quantum
LightSpeed Appliances Getting Started
Guide or scan this QR code:
For more information, visit the Check Point Support
Center SecureKnowledge (sk) page for the Quantum
LightSpeed Appliances, search the sk number.