Oasis EH9h Installation Instructions Manual page 16

All manuals and user guides at all-guides.com
4. USAGE AND OPERATION
2.3 Temperature setting
In the main interface press
flashes, then press to increase the temp.value, or press
Press MODE can save setting parameter and back to the main interface
SET
Press can not save setting parameter but back to the main interface
Attention If there is no operation for 5s system would remember parameter setting and
back to the main interface.
For example:
TEMP
IN
MODE
TEMP
OUT
TEMP
IN
MODE
TEMP
OUT
2.4 Clock setting
In the main interface press
to increase value or press
At the same time, minute start to flashing
to decrease value and press
Press can not save setting parameter and back to main interface.
Attention If there is no operation for 5s system will remember parameter setting and back
to the main interface.
For example
or and the current mode target-temperature
Cooling target temperature
Press
SET
TEMP
or
TEMP
SET
OUT
Press
or to change the value
MODE
Press
SET
SET
TEMP
to save value
TEMP
OUT
SET
setting
twice Hours start to flashing
to decrease value and press
press
to save setting.
13
to decrease it.
MODE
SET
MODE
SET
and press
to save setting
to increase value or press