How To Use - Panasonic MX-EX1511 Operating Instructions Manual

Blender
To disassemble
Turn anticlockwise
2
gasket is not damaged
1
and placed properly
1
Place the ingredients into blender jug, and then close the lid.
2
Attach blender jug to the motor housing.
Align the on the motor
housing with the on the
until you hear a click sound.
3
Plug in. Hold the blender jug, and then turn the rotary
switch to "1" or "2" position to start.
If the appliance stops during
operation. (P. EN8)
When adding ingredients or
Add ingredients as shown right.
4
When blending is completed, turn the rotary switch
to "0" position to switch off.
Unplug.
Turn the blender jug
anticlockwise to remove it,
open the lid and take out the
ingredients.
EN6

How to Use

Dry mill
To assemble To disassemble
Turn clockwise Turn anticlockwise
2
3
2
1
1
1
Turn the mill container upside down and place
the ingredients in it. Twist the mill container base
clockwise until you hear a click sound.
2
Attach the mill container to the motor housing.
Align the
housing with the
1
mill container.
Twist mill container clockwise
2
until you hear a click sound.
3
Plug in. Hold the mill container, and then turn the rotary
switch to "1" or "2" position to start.
2
If the appliance stops during
operation. (P. EN8)
1
3 4
When grinding is completed, turn the rotary switch to
"0" position to switch off.
Unplug.
Turn the mill container
anticlockwise to remove it,
open the mill container, and
take out the ingredients.
3
4
2
1
To assemble
Turn clockwise
Make sure the mill
gasket is not damaged
1
and placed properly
on the motor
on the
1
3
4
3
2
1
2
2
2
1