Initiating Control Operations; Figure 3-34. Point Status Display Window - Simplex 4120 Operating Instructions Manual

Viewing the Status of Points and Controlling Point Operations,
Continued
Viewing the Point Status
(Continued)

Initiating Control Operations

Figure 3-34. Point Status Display Window

In addition to viewing the point status at the Point Status Display Window you
can also initiate control operations and view action messages.
To initiate control operations, do the following:
1. In the Select Box , select CONTROL. After you select Control , a window
similar to the one shown in Figure 3-35 is displayed.
3-29
firealarmresources.com
Continued on next page