Viewing the Status of Points and Controlling Point Operations
Introduction
Accessing the Status and
Control Functions
The Status and Control functions allow you to view the status of points in the
system, view the action messages associated with the various points, and initiate
point specific control operations (such as disabling a point). The following
topics are discussed in this section:
•
Accessing the Status and Control Functions
•
Viewing the Point Status
•
Viewing the Action Messages
•
Returning to the Main Menu
•
Changing the View
Silencing Alarms and Resetting the System are discussed in the section titled
Viewing Active Lists.
To access the Status and Control Functions, do the following:
1.
Press the Status and Control Button (Figure 3-32) located on the Main
Menu.
Figure 3-32. Status & Control Button
2. After you press the Status and Control Button, the Status and Control Menu
(Figure 3-33) is displayed.
3-27
firealarmresources.com
Continued on next page