Closing The Active Volume; Figure 3-18. Historical Log Volume Operations Window - Simplex 4120 Operating Instructions Manual

Viewing the Historical Log,
Deleting A Volume (Continued)

Closing the Active Volume

Continued

Figure 3-18. Historical Log Volume Operations Window

2. At this window, highlight the volume you want to delete.
3. Press Delete and the volume is deleted.
The Active Volume is the volume which is currently being filled with system
events. There can be only one active volume in the system at a time. To close the
active volume do the following:
1. At the Historical Log Window, press Volume Operations at the bottom of the
screen. When you press Volume Operations, a window similar to the one
shown in Figure 3-18 is displayed.
2. At the Historical Log Volume Operations Window, press Close Active
Volume and the Close Active Volume Window (Figure 3-19) prompts you to
be sure that you want to close the active volume.
3-15
firealarmresources.com
Continued on next page